Can you solder artistic wire

For other designs you may need to hammer-texture them or use a wire whacker on your finished design. It is usually only available in dead soft, and may require heavy-duty wire cutters or a jeweler's saw. It's a great thickness for making wire bangle bracelets, but it's too stiff for some crafters' hands to work with. It is usually only available in dead soft, and generally requires heavy-duty jewelry tools for both cutting and shaping. Wire Shapes The shape of a wire refers to what you see when you look at a cross section of it i.

Round wire is the most common wire shape, and is the standard shape used in most wire working. Square wire is sometimes chosen for purely aesthetic reasons, since the corners of square wire lend a different look to finished jewelry. It also has a practical advantage when you want to place several pieces of wire flush against each other. The flat sides of square wire will lay flush in a way that round wire can't.

This makes square wire preferable in banding designs. Also, you can use a pin vise to twist square wire, for a sparkling effect. Half round wire is typically used to connect several adjacent pieces of square wire. The flat side of the half-round wire is placed against the square wires, and the rounded side remains exposed in the finished design.

This is called banding. Twisted aka fancy wire is used to provide textural and aesthetic qualities to wire work. It can be formed from round wires or square wires. When making your own, keep in mind that your finished fancy wire will be a thicker gauge than the individual wires you start with. Wire Metals You have many choices regarding what metals your jewelry making wire is made of, including precious metal wires and base metal wires. Please allow a few minutes for this process to complete.

Join Now. View All Benefits. No products in the cart. Search for:. November 24, When Not to Use Craft Wire There are a lot of pros to using craft wire, however, there are a few cons. Categories: Beading. Tagged: recycled yarn. Responses Cancel reply You must be logged in to post a comment. The thicker the layer of colour, the more times it has been baked, the stronger and shinier the colour will be and the more resistant it will be to scratching.

If you scratch this wire you will see the copper core. It is available in multiple wire gauges and many different colours. Also known as Bullion wire. This is wire that is actually a coil, so it is hollow in the centre. Usually available in silver and gold and in different sizes. It is traditionally used in jewellery making to protect find threads or cords - you thread the cord through the wire and it sits over cord protecting it from rubbing which may weaken the cord.

However it can be used as a spacer, as a wire, or coiled into beads. Is not what it sounds like. It is actually made from a gold coloured alloy usually jewellers brass which is then dipped in gold minimum of 10kt. Be aware that there are some cheap versions of this wire available which have a copper core, which means that you will see a colour difference and if you scratch this wire, it may show the different coloured core.

This in effect means that the jewellery wire looks like gold and wears like gold. You do have to be mindful of scratching the jewellery wire with your tools but light scratches can be sanded out. It is available in multiple wire gauges, shapes, tensions and now we even have solder available.

This wire can be tumbled with stainless steel shop, hammered gently and soldered. All of the wire that I stock on this site is 14K with a jeweller's brass core, it is top quality made in the US. Gold plate means that the item has gone through an electroplating process, where gold is bonded to an alloy.

The gold layer is very, very thin only microns thick. The alloy is a mixture of different metals, usually copper, brass and nickel. So gold plating is prone to wearing off, chipping and can be easily marked.

A lot of findings are gold plated and some jewellery wires are as well. These days it is very hard to tell if something is actually gold plated or has been coated to appear gold in colour. Some gold coloured wire is actually brass and not copper alloy. If you want to know that it is actually gold plate, then you need to ask about the item specifically, don't assume that gold coloured wire is gold plated!

It is used mostly in jewellery making as it has a great gold colour. It is also quite a hard wire and is usually tarnish resistant. At Cooksongold, we offer an extensive collection of coloured artistic wires in a range of different finishes and dozens of sizes.

We also sell Beadalon artistic wire in tarnish resistant silver plated copper, tarnish resistant brass, and Beadalon wire in 'natural' coloured copper for your jewellery making projects. In Stock. Only a few left - more expected 25 Dec.

Beadalon Artistic Wire 20 Gauge Black 0. Out of Stock. Please note all prices listed are based on cash prices and are exclusive of VAT. Prices for precious metal products are an estimate only and can vary slightly depending upon the metal price, the actual weight and the cutting tolerances which we are able to achieve. Bullion prices are based on 10gm. We ship to over 70 countries!